Sunday, June 04, 2006

Shields Up!

I got a small ceramic heater to heat up the air before it gets sucked into the back of the CPAP machine, in order to not freeze my nasal passages. By experimentation, I have found that I have to keep the heater in high, constantly running, in order to heat the air enough that it doesn't bother me. I have also found that I need to have the heater so close to the intake valve that the machine gets too hot.

The room also gets too hot, so I have to leave both windows open all night to keep the temperature cool enough that I can sleep.

I am getting closer to a working configuration. For 2 nights, I have been able to sleep for 5 hours straight. I touched the supply hose that extends from the CPAP to my nose, the hose was very warm as it left the coupling on the CPAP machine, but cooled off as it got about 1/3rd of the way to my nose. By mid length, the hose was not warm nor cool.

The back of the CPAP machine was getting too hot from the heater. I was afraid that it might catch fire. I have insulated the back of the device with tin foil, with the relfactive side outwards. I put on many layers. The power coupling is also on the back, which made the insulation difficult. It makes sense that they would put the power coupling there, because the transformer gives off heat, and the energy would give a slight bit of heat to the incoming air. The air intake is just below the transformer. I have noticed when I forst turn the device on, the air feels warm as it comes in my nose, but then quickly cools off. That is the result of the power spike spillover as the electrons rush into the transformer, then back up.

Unformtunately, the transformer can overheat and burn out. The CPAP machine has no cooling vent. So although I am keeping the high volume of heat from entering the device, I am also not letting the inner heat to escae where it normally would escape. The inner heat is flowing to the front of the device, which will eventually harm the analog electronics which control the on/off swith and ramp button, as well as the vacuum rotating pump. The device is so old, I have to be careful with it. It has to last me 2 or 3 more week, and perhaps forever if Kaiser doesn't come through.

I am going to place the device on top of a tupperware container filled with ice. I am making a solid block of ice to fill it. I have insulated the back half of the tupperware as well. Just call me: Dr. Science.

I keep having fears that Kaiser won't help me. I have had to wait for so long. What if they misread the data, or mislabel it, or whatever, and I don't get a device. I know this is totally irrational, but this is the one thing that if I don't get help on, I really believe I will die.

0 Comments:

Post a Comment

<< Home